Stair

[n.q.hung]

Hello Everybody, 

I want to creat a stair like this image but stair run shape is a bit uncomfortable 😞

How can i create this, please help me !

Thanks alot !

 

[n.q.hung]

Can i cut the shape of stair run ?

@ToanDN 

[cuanstephens]

Hey @n.q.hung 

You'll have draw the stair in "creat sketch" mode. Make sure the levels are correctly set in your setting before commencing.

[n.q.hung]

thanks but i want to edit landing to like this image

do you have any ideas to do this ?

[n.q.hung]

Thanks but i want to edit landing to like this image

do you have any ideas to do this ?

[_Vijay]

For curved shape connection between flight and landing, you can not make... maybe you can try within pace family. but it's not an exact solution. 

[n.q.hung]

Really..., family generic model can resolve it ? 

But it's quite a hassle to create a new family of stairs, right?

[barthbradley · Accepted solution]

Is this what you are after?  

[lim.wendy]

Hi @n.q.hung,

Thank you for submitting your question in our discussion forums. Have you had a chance to look over the suggestions provided by our experts? I wanted to reach out and see if you were able to get your issue figured. 
Let us know how things are going!

[Mohamed-Nassar]

Hello may this help you

https://www.youtube.com/watch?v=aEu0lwHmPPQ

https://www.youtube.com/watch?v=0y3tQoaFAJU 

[n.q.hung]

Wow, how did you do it, it looks good...

[n.q.hung]

My problem still not fix, can you help me ?

[n.q.hung]

@barthbradley  please show me how to create it, thanks !

[barthbradley]

---

@n.q.hung wrote:

@barthbradley  please show me how to create it, thanks !

---

Model the Stair Stringer as an In-Place Component using a simple extrusion.  Easy, breezy.  

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2016/EN... 

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2018/EN...

...oh, and set your "Supports" under your Stair Type Properties to "None".  

[lim.wendy]

As always, thank you @barthbradley! Super helpful!

[n.q.hung]

@barthbradley Stringer by model in place, right ?

but it cannot intersect the stair flight on the inside...

Do you have any other treatment ?

i want to use this stair to volume estimate so i need relative accuracy ...

Many Thanks !

[barthbradley]

Post your file.  

[n.q.hung]

@barthbradley 

I attached my file below, please help me see it bro

[barthbradley]

I don't understand what you are after? Why don't you just change the structural depth? It's a monolithic cast-in-place concrete stair; right?   

[barthbradley]