Stair Path Arrow - up to the top?

[adamskaEXHPY]

Hi guys,

I am struggling with finding the setting to extend the stair path arrow until the top of the stairs...

Any idea where I can find it? Thank you 🙂 

[ToanDN]

Create a plan region with the cut plane above the top of the stair and the view range bottom at the base of the stair.

[adamskaEXHPY]

Hey, thanks for the suggestion but it didn't extend the arrow.

[RDAOU]

@adamskaEXHPY 

See Below GIF...

• Case 1: Single Level 1 to Level 2
• Case 2: Continuous All Levels

See which suits your case best...otherwise, attach the file to set it up as per your model

[barthbradley]

---

@adamskaEXHPY wrote:

Hey, thanks for the suggestion but it didn't extend the arrow.

---

You can get there with a Plan Region, but it takes some fidgeting with View Range. There's a sweet spot that exits that will show the whole arrow/path uncut and continuous from top to bottom.  

[ToanDN]

---

@adamskaEXHPY wrote:

Hey, thanks for the suggestion but it didn't extend the arrow.

---

Then the view range of your plan region is not setup properly.

[mikael_saaw]

The setting you are looking for it's under Visibility/Graphics override, Annotation Categories and Stair path.

You need to check <Above> UP Arrows.

Hope it helps!