Stair Numbers missing (when printing)

[info]

HI,

I'm missing stair numbers when printing,

When zooming in & out in Revit the stair numbers  disappear and reappear sporadically?

See attached.  

[PrathapSekar · Accepted solution]

Have you tried the following link?

 https://knowledge.autodesk.com/support/revit/troubleshooting/caas/sfdcarticles/sfdcarticles/Views-ha... 

Guess this may help you, if you did not try the above link already!

[info]

Hi Thanks for the link; 

The zooming in/out and missing stair numbers is a problem. But I know the tread numbering is in the model.

But It's more that the numbers are not printing

- to fix this I had to number each missing step (with text) individually which was quite tedious, and annoying due to knowing the stairs were already numbered.

[info]

thanks again I reviewed the link; 

If I close the file, switch off Accelerated Hardware - open file & print, the stair numbers appear in the print!

I don't fully understand how the the Accelerated Hardware is involved with producing a PDF, but it appears to work.

But like I said; it only works after closing file, changing settings, and reopening again to take effect.

[PrathapSekar]

Glad you found this helpful!