Stair end riser cannot connect properly with floor slab

Stair end riser cannot connect properly with floor slab

shihas.pms24
Contributor Contributor
507 Views
6 Replies
Message 1 of 7

Stair end riser cannot connect properly with floor slab

shihas.pms24
Contributor
Contributor

Hi Experts,

I have created a stair from GF to First floor level (Ex-10 riser). So, in floor plan layout 10 riser, but in section the last riser and First Floor slab not connect properly (1 riser gap is there). So to fix it i create a landing at end of the 10th riser, then it solved in section. But in floor plan layout there is 1 extra riser. means, the required number of riser is 10 but including the landing its looks 11 riser. i tried to hide that landing in floor plan layout but its not working. So any solution to sole it.......................

 

Thanks in Advance...

0 Likes
508 Views
6 Replies
Replies (6)
Message 2 of 7

ToanDN
Consultant
Consultant

Edit stair,  select the run and check End wiith riser.

0 Likes
Message 3 of 7

shihas.pms24
Contributor
Contributor

It already i tried but its show just a riser only still not connect properly . It should be connect like the attached image. but in the image actually its a generic model.

 

shihaspms24_0-1701093909727.png

 

0 Likes
Message 4 of 7

ToanDN
Consultant
Consultant

If you want that you still need to uncheck End with riser and stretch the run add one more step to the top, or add a landing at the top of the stairs.

0 Likes
Message 5 of 7

barthbradley
Consultant
Consultant

@shihas.pms24 wrote:

It already i tried but its show just a riser only still not connect properly . It should be connect like the attached image. but in the image actually its a generic model.

 

shihaspms24_0-1701093909727.png

 


 

Are you saying that this thing highlighted in screenshot below is the Generic Model?  

 

Stair not meeting.png

 

If so, why don't you just move the stairs closer to the floor?  😉 

0 Likes
Message 6 of 7

shihas.pms24
Contributor
Contributor
this method also i did. its solved in section view but in plan 1 extra riser visible. means ,if the required number of riser is 10 , when adopt this method the total number of riser in pan is 11. the last riser (The landing cannot hide also in plan).
0 Likes
Message 7 of 7

shihas.pms24
Contributor
Contributor

This is now as per your suggestion. But when we draw a stair section, by default section will be like this.  see its properly not connect with floor slab.

Either should connect with slab nor will connect it with a beam as per my first screenshot. Still you can see the bottom of slab and stair run not merge together.

shihaspms24_0-1701151635035.png

 

0 Likes