Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am currently tracing pipe for a project, and there is one pipe that drops in elevation, (the slope is unknown, so we are just assuming the 1/2" 12" slope from revit), but when I click on Systems, Pipe, I click on the Slope Down and have Change Slope selected, then I try to connect to an elbow I have created and it won't connect or create. Then I model where it is not connected to the elbow, and it creates the pipe, but then my pipe is not sloping at all.
...Arrgh! Can't post Screen Captures for some reason. Go to Family and toggle System Classification to Global, then check the Allow Slope Adjustments parameter that appears in Properties.
