Sloped floor plan not displaying correctly

[AbbyCZQ26]

I am modeling a skybridge that is ramped. I have created a floor plan of the bridge, but because the cut plane of the floor plan is flat and the bridge is sloped, the plan is not displaying correctly (see attached). Is there a way to angle the cut plane so it reads correctly?

I have already tried using a section view, but it caused a problem with annotations and still wasn't reading right.

[ToanDN]

---

@barthbradley wrote:

---

---

Maybe @ToanDN can post a Screencast.    

---

Post it yourself.

[AbbyCZQ26]

I tried that, like I stated, but I guess you can't rotate section views on Wednesdays 😞

[barthbradley]

---

@ToanDN wrote:

---

@barthbradley wrote:

---

---

Maybe @ToanDN can post a Screencast.    

---

Post it yourself.

---

That's not what I do here. I provide the solution and you provide a Screencast of my solution. I'm your muse, so to speak.   No need to thank me.  You're welcome.   

😉

[ToanDN]

---

@barthbradley wrote:

---

---

That's not what I do here.   

---

That is exactly what people who can't do something making excuses.