Sketching stairs with 2 diffrent run paths

Sketching stairs with 2 diffrent run paths

Anonymous
Not applicable
697 Views
5 Replies
Message 1 of 6

Sketching stairs with 2 diffrent run paths

Anonymous
Not applicable

(Revit 2015)

Hello,

I'm trying to sketch one stairs path but with two diffrent runs (with landind connecting them).

The stairs has to be monolitic.

 

For example, in my case :

First run should be 16 stairs with riser height of 175 mm. Second run should be 12 stairs with riser height of 162.5 mm, in order to complete the stairs between the two levels. (total of 4750 mm).

landing between two runs should be 250 mm height.

 

Is there a way to do it as one element?

 

Many thanks,

 

 

0 Likes
698 Views
5 Replies
Replies (5)
Message 2 of 6

Alfredo_Medina
Mentor
Mentor

@Anonymous

 

For many reasons, all risers of a stair should have the same height. You have to distribute the total height in a certain number of risers. 


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
0 Likes
Message 3 of 6

Anonymous
Not applicable
Is there any solution?
0 Likes
Message 4 of 6

ToanDN
Consultant
Consultant
A simple solution is creating two stairs.
0 Likes
Message 5 of 6

Anonymous
Not applicable
Okay, have tried it. But then I can't connect them together with a single standing... and sections views looks bad 😞
0 Likes
Message 6 of 6

ToanDN
Consultant
Consultant
Build a model in place stair if you want it both not following the rules and looking clean at the same time.
0 Likes