Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
What is considered to be the best way to get a sink family to cut a hole in the countertop that you place it in? There are several nice Revit sink families out there that don't cut a hole in the surface that you place them on. When I go into the family to add a cut opening, it is grayed out. How can I add the cut out or void in these sink families? I have added voids, but to no avail.
Thanks for any help with this. It must be perplexing to more folks than me. . .
After adding a void to the sink family, you need to open Family Category and Parameter window and check the [Cut with Void when loaded] box. Upon placing the sink to top of the countertop, use Cut command on the Modify menu to cut the hole. You can also nest the sink to the countertop family as well.
