Show Hidden lines in section

Show Hidden lines in section

Anonymous
Non applicable
4 085 Visites
5 Réponses
Message 1 sur 6

Show Hidden lines in section

Anonymous
Non applicable

Hi everyone.I want to see hidden lines of stair in section view like second picture.I know using of detail line is one of solution,but I want to use show

hidden line because there are several stair in this view

 

 

.1.jpg2.jpg

0 J'aime
4 086 Visites
5 Réponses
Replies (5)
Message 2 sur 6

ToanDN
Consultant
Consultant
You could switch the View to Wireframe visual style, and use the Linework (LW) tool to change the profile of the treads and risers to Hidden Lines. When done, switch the View back to Hidden visual style.
0 J'aime
Message 3 sur 6

constantin.stroescu
Mentor
Mentor

it's odd that you can do it automatically in 3d but not in section or elevation view, using :View >Show Hidden Lines:

 

3.png

Constantin Stroescu

EESignature

0 J'aime
Message 4 sur 6

loboarch
Autodesk
Autodesk

@constantin.stroescu wrote:

it's odd that you can do it automatically in 3d but not in section or elevation view, using :View >Show Hidden Lines:

 

 

 

It is a known limitation of the stair element in Revit to support hidden lines in an elevation/section view. It is logged with development for possible future development.



Jeff Hanson
Principal Content Experience Designer
Revit Help |
Message 5 sur 6

Anonymous
Non applicable

I think they should solve it.It is very useful to show hidden lines of stair in section view automaticaly.because if we have several stair it is not possible to use detail line for each of them.

0 J'aime
Message 6 sur 6

ToanDN
Consultant
Consultant

Perhaps you can add another section that only shows the treads and risers, make it transparent, and put on the same Sheet.

 

Capture1.PNGCapture.PNG