Section cuts disappeared

[Anonymous]

hi there,

I created Section Cuts of my drawings.  I have the Section Cuts that I need, but on the Floor Plan, the section cut are not visible.  I need to be able to show where the Section Cuts are on my Floor Plan.  I have tried looking in Visiblity Graphics and tried Reveal hidden Elements but they are not there.  I assume I could not have deleted them since if I did, I wouldn't see them listed in Sections in the Project Browser.

Can anyone suggest how else I can find them? 

thanks for any suggestions as I would really prefer not to have to recreate from scratch.

Thanks

[constantin.stroescu · Accepted solution]

Section Lines in floor plan Views have an option to be hidden at a scale coarser then...:

Properties > Graphics > Hide at Scales coarser then....

Maybe this is the reason.

[Anonymous]

thanks so much,,, never seen this before and happy to get your response!@!

[Anonymous]

---

@constantin.stroescu wrote:

Section Lines in floor plan Views have an option to be hidden at a scale coarser then...:

Properties > Graphics > Hide at Scales coarser then....

Maybe this is the reason.

---

May be someone can give me a solution

I have created a section in a floor plan of an existing project.

The floor plan is Level 3, it has view template Floor plan Scale 1/8"

Phase New

I can see several section marks already done. 

Then I create a new Section, I am using "Hide at scales coarser than 1/8" . I have verified the Crop region, It goes down to Level 1 and up to level 5. This means is cutting level 3 and should be visible in level 3. When I created the section I am using a work set which is on in the plan view and everywhere else just in case. I has the same discipline in floor plan and also in section "Architecture", I have verify my visibility graphics, and sections is on, I have use the light to see if the section was available for UnHide command. it is not . MY opinion I have check every aspect, and still is not visible in floor plan. Is it possible there is a settings where the  view does not show any new section mark? some kind of luck that prevents from showing any more section marks? I can see this a which to protect in plotting sheets without showing any new working section. Does anyone can help me? please let me know thanks

Not silly answers please. As I described I have already cover all the normal options that an advance user could ever check and still is not showing. Any good help will be appreciated.

Thanks

[Anonymous]

To enhance my question.

The section and the floor plan , both have same phase, same scale, all visibility graphics on, cropping is passing through the floor plan. Same Architectural discipline.

What I am missing?

[ToanDN]

Look into the View Filters see any Section Types are set to not show.

[Anonymous]

how would I get here? To the view filters?

I am having the same issue. My sections seem to disappear when I assign a template. But the weird thing is, when I unassign the template to the section, it still will not reappear. Only appears in plan view when no templates is assigned to the section

[Anonymous]

and I also get this message when I try to find the section in a plan view

[Harris_Josh]

This answer just saved me from recreating building sections on a large project... I think one of my team members must have messed with this setting because I couldn't for the life of me figure out how to find it. 

Thank you!

[nastaranRE7MT]

I have the same problem, I have checked the hidden elements, VG, and the "Hide at Scale Coarser Than" option. None worked. Any new section cut I draw, it just doesn't show and I get an error that it is hidden. 

Please help! All my previous section cut lines are gone too.

[nastaranRE7MT]

I have the same problem, I have checked the hidden elements, VG, and the "Hide at Scale Coarser Than" option. None worked. Any new section cut I draw, it just doesn't show and I get an error that it is hidden. 

Please help! All my previous section cut lines are gone too.

[azad.Nanva]

did you checked "Annotation Categories" :

or Filters and visibility:

[nesma4E4JQ]

Hi, I'm having the same issue and I tried all of what's mentioned here and nothing worked, mine has disappeared after I changed the levels of the project (I elevated everything by couple metres)