Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Saved 3d View on sheet tilted slightly every time I go to print

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
Anonymous238
164 Aufrufe, 4 Antworten

Saved 3d View on sheet tilted slightly every time I go to print

I have Revit 2025 if that matters. Every time I go to print my set, my 3d view is slightly tilted over my titleblock, requiring me to fix it over and over and over again. I don't know why this keeps happening. The view is pinned but I don't think that matters. Very strange

 

Anonymous238_1-1725481977878.png

Anonymous238_2-1725481996296.png

 

4 ANTWORTEN 4
Nachricht 2 von 5
SteveKStafford
als Antwort auf: Anonymous238

Have you saved the view's orientation?


Steve Stafford
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
EESignature

Nachricht 3 von 5
barthbradley
als Antwort auf: SteveKStafford

Save and Lock; right @SteveKStafford?  

Nachricht 4 von 5
Anonymous238
als Antwort auf: barthbradley

So originally I clicked the default 3d view and then go to the view name and change it to save it right? I placed that view onto the sheet and pinned it; but its still moving and not based on the original default 3d view which I'm constantly moving around. Is there something else I need to lock?

Nachricht 5 von 5
barthbradley
als Antwort auf: Anonymous238

I don't know what you are doing, but I'm suggesting Save and Lock - which I assume Steve is as well.  

 

Save and Lock.png

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report