Existing conditions are set up all exterior walls are existing and all new unit partitions are new. i have checked all things i could think of to why i cant place any rooms in specific places within a building model. all walls are room bounding and all parameters match in adjacent areas which have rooms placed, nothing is hidden, without using room separation lines i should be able to place rooms in the white spaces, but am denied the ability. any ideas ?
Couple of things to check.
1. Check and see if the exterior wall is room bounded
2. Set the computation height to value other than 0
3. Check and see if there is plan region in that location
Computation height is quite high, that is usually much lower.
Steve Stafford
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
One way you can test is add arbitrary room boundary separation and add room to those region. That way you can isolate section area that is causing the issue.
Great at least we are getting somewhere. Now check and see if the column & exterior walls are set to room boundary.
It's usually 0'-0". Make sure there are no floor elements that are room bounding and above the level.
Steve Stafford
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
all rooms are set to room bounding on all floors, all walls are set to room bounding on all wall types (highlighted orange)
