Room not showing in plan

[TeresaXMJLQ]

Room Food Storage is showing up on the RCP but not on the floor plan. I do not have any plan regions in the area. If I try to tag the floor plan I get a message it is already there and will be duplicated.

Any ideas?

[syman2000]

Have you change the room height? Also check and see if the room isn't hidden by element accidently or misplaced in the wrong workset.

[TeresaXMJLQ]

Yes and Yes, it is not hidden either.

Thanks for you ideas though-

[ToanDN]

Can you select that room on the RCP and show its properties here?

[TeresaXMJLQ]

yes

[ToanDN]

---

@TeresaXMJLQ wrote:

yes

---

It is not a yes or no question 😉

[TeresaXMJLQ]

Attached is the properties

[ToanDN]

What if you change the Computational Height of the Level from 3'-0" to 0?

Can you cut a section, turn of Room Interior Fill for the section view and see what you get?

[TeresaXMJLQ]

I cant its greyed out

[ToanDN]

---

@TeresaXMJLQ wrote:

I cant its greyed out

---

You change Room Computational height but opening a Section or Elevation, select the Level and change from its properties.

[TeresaXMJLQ]

Nothing shows up in the Floor Plan view still.

[ToanDN]

Can you share the model here?

[TeresaXMJLQ]

No sorry~

[syman2000]

Is your room set to volume?

[TeresaXMJLQ]

It is set to Areas Only. This is the message I get when I try to tag the room.

[syman2000]

Cut the section. As well move the room away from the stair opening.

[TeresaXMJLQ]

for goodness sakes lol, Thanks~! I moved it away from the stair and added a room separation line and that fixed it.

Thanks for spending so much time helping me figure this out!

[ToanDN]

Does the room show if you create Plan View from scratch (View > Plan Views > Floor Plan > Uncheck Do not Duplicate...)?   If so, turn on Plan Region and delete any on the Plan view that the room is not showing.