Revit Topo - Section box and below ground patterns

[jmayo-EE]

Is it possible to turn off the brown topo patter below the ground when the section box cuts the model?

jmayoEE_0-1631624493835.png

[RDAOU · Accepted solution]

@jmayo-EE 

• Do you mean to stop it from filling the basement? In such case you need to place a building pad at the footprint of the basement
• Or do you mean entirely switch it off? 
  • One way is to Change the Poche material to Air and make transparent
  • Another is to make the Poche Elevation Base "0"

RDAOU_0-1631626930603.png

Edit: Seeing that tunnel in the image, building pad might not be ideal for that spot...and you might need something similar to what is discussed on the following Post 

https://forums.autodesk.com/t5/revit-architecture-forum/earth-filling-the-plan/m-p/9260427

[jmayo-EE]

Thanks for the tip but I don't believe a building pad will expose the piles or the culvert opening. I did try this with the basement but that didn't help either even with a transparent material the cut topo shows. I really need to turn of the brown topo cut patterns to see what I need to present.

jmayoEE_0-1631628959633.png

[jmayo-EE]

Need some time to look at the other solutions. Will reply back soon.

Thanks again.

[jmayo-EE]

Bingo!

#2 hit the nail on the head. Changed the poch material.

Thx a bunch