"Top reference is bellow Bottom reference for one or more Balusters"

[Anonymous]

Hello,

How can I split a railing into three parts? What it says here: https://knowledge.autodesk.com/support/revit-products/troubleshooting/caas/sfdcarticles/sfdcarticles...

I don't know how to fix the warning

Thanks,

Isabel

[PijPiwo]

Can you upload your rail with the sketch of what you're trying to achieve?

[Anonymous]

It happens with all railings I create

Thanks,

Isabel

[PijPiwo · Accepted solution]

I thought you could post rvt file as well …anyway, what the error basically means is that the base and base offset settings for the baluster/post cannot be above top and top offset.

[Anonymous]

Oh, thank you for specifying!!

[andre_adc-dao]

Hi,

I had the same problem. Can you detail your solution?

I dont'have this problem with metric template and I'm using Revit 2017.

Regards,

Andre

[Anonymous]

Thank you so much!!

I can resolve my problem.

[PWijayasinghe]

Thanks a lot, man... I was struggling with this for hours. 

[Mike.FORM]

Can you show us the rail element dialogue? You are using "Rail 1" as your top host and have a -100 offset from that element. You also have a 100mm offset above the host so I assume your "Rail 1" is likely not 200mm + above the host which is causing the error. Balusters have a 0 height.