Problem with pane door in courtain wall

[Anonymous]

Hello, trying to do a curtain wall and put in panel type "door with 1 leaf". 

Everytime I put a grid program set a door. 

There isn't possibility to insert door only 1 time? There ins't possibility to insert 2 type of panels?

In addition to this with selected curtain wall can enter in layout. Can't have oblique grid with door panel?

And because there are for vertical and orizontal two values to put?

I click every time the same values for the two numbers can modify for orizontal and vertical vales (att. 2)

Thank's

[PijPiwo]

Take a look at these tutorials. They should get you started with the curtain walls.

https://www.youtube.com/watch?v=VeVOLB9ZkyQ

https://www.youtube.com/watch?v=XQTEGiwhHag

https://www.youtube.com/watch?v=8aeDCfir6oQ

[ToanDN · Accepted solution]

---

@Anonymous wrote:

Hello, trying to do a curtain wall and put in panel type "door with 1 leaf". 

Everytime I put a grid program set a door. 

There isn't possibility to insert door only 1 time? There ins't possibility to insert 2 type of panels?

Because you set the default panel as the door family.  When you add a new grid , Revit automatically assigns the default panel to the new cells, so you have the doors in there.  Change the default panel to a standard glass panel, where you need doors just unpin the panels and change to the door family.

In addition to this with selected curtain wall can enter in layout. Can't have oblique grid with door panel?
Only system panel types or work with non-rectangular cells.  If you need a door in a non-rectangular cell, change the cell's panel to a wall type, then insert a door in the wall.

And because there are for vertical and orizontal two values to put?

I click every time the same values for the two numbers can modify for orizontal and vertical vales (att. 2)

I am not fully understanding what you are trying to say.  But you can only have two set of grids in a single curtain wall type.  If you need more, use embed curtain walls with different grid layouts for your main curtain wall panels. 

Thank's

---

[Anonymous]

@ToanDN "just unpin the panels and change to the door family." can do a screenshot please?

==> "If you need a door in a non-rectangular cell, change the cell's panel to a wall type, then insert a door in the wall."

"If you need a door in a non-rectangular cell, change the cell's panel to a wall type, then insert a door in the wall."

In the attachment there are 2 number for grid (eightlighted numbers). 

[ToanDN · Accepted solution]

See screencast.

[Anonymous]

Incredibly gorgeous! :))

[Anonymous]

@PijPiwo

thank's very much for this video! Very interesting

https://www.youtube.com/watch?v=VeVOLB9ZkyQ

I do not undrestand how at minute 5:13, after loaded curtain wall door, clicking on comment of property panel with glass panel selected, insert the door. 

It isn't for me. 

[PijPiwo]

---

@Anonymous wrote:

I do not undrestand...

---

Frankly? ..neither do I (???).