Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Point Clouds on OS, Point Cloud does not sit in correct position
Point Clouds on OS, Point Cloud does not sit in correct position
Hi
This bug has been around since 2015 was release and exists in 2016 and possibly 2017.
What happens is, a point cloud inserted to a file on large co-ordinates (9 digits - UK OS in mm) cannot be snapped too and it does not sit in the correct position. It is about 20-30mm out compared the same point cloud in Recap and Cyclone.
This makes moving forward for any projects starting fresh in 2015 and 2016 a problem unless we truncate the co-ordinates.
