Placing ceiling hangers at grid line's intersections

[Anonymous]

Hi!

I'll need some help from you.

I'm trying to make a Dynamo script to place hangers along my ceiling rails just as shown in the attached image.

The ceiling is a triangular sloping surface modelised as a curtain wall, so I'd like to place those hangers every 3 intersections of the curtain wall's grid lines.

Please help me, my boss is changing them every two days, I need this dynamo script...exemple

hanger location

[stevie_kelly]

Hi @Anonymous,

Great idea! I have written a script for you... I have tested it, so it should work, but do let me know if you have any issues.

I created it in Revit 2018 and Dynamo 1.3.4, and used the Rhythm node package (which you'll need to install if you don't have it).

It's quite self explanatory as I wrote some notes on it, but please let me know if you want some help using the script, or if you need some changes made.

Kind regards,

Steve

[mrukhsar]

Hi can you please help me i want to place hangers at ceiling grids

[Grace.AndersonWBDDB]

Hi Steve, 

I'm trying to achieve a similar outcome. But I have used Sloped Glazing as a suspended T-Grid ceiling. Is there any way of incorporating this dynamo code into my Revit file? 

[RDAOU]

@Grace.AndersonWBDDB 

You had a post started on this subject or am I mistaken

https://forums.autodesk.com/t5/revit-architecture-forum/suspended-t-grid-ceilings-creation-schedules...

[Grace.AndersonWBDDB]

I did but that was for the grid which I have achieved. Looking for solutions to place the hangars and connectors. I'm going through lot of Dynamo tutorials so fingers crossed I can create some kind of solution 🤞🏼

[RDAOU]

@Grace.AndersonWBDDB 

In your previous post you wanted something more of a not complicated and user friendly.

Is Dynamo now considered as a solution? if it is the best would be to start a new post with those attachments and there are a few of us on this forum who can help you with a dynamo solution.

Otherwise there is a dedicated forum for dynamo on the following link  https://forum.dynamobim.com/

[RDAOU]

.