Hello
as the name suggests, i have a pipe intersecting a wall with an angle as you can see in the picture, is there a way to make a cut around that pipe and along its path so there is no clash?
thanks in advance
Instead of using the Opening Cut use a 3D void form and use that to cut wall with
YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION
Typically you can create a family with angle parameter for the cutout. See attached.
There are multiple ways to do this as per earlier posts. My preference if I was to use a family is creating a line based generic model void and place it along your pipe/duct axis and use Cut geometry to cut the wall with it.
Another way that is using mass, as shown in the screencast below.
https://knowledge.autodesk.com/community/screencast/6bcc0733-8071-4a05-8284-66e060597fcd
Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.