Picking counter top as work plane for sink makes counter top disappear in 2d view

[mbozatl031]

When I bring in a sink component, and pick the counter as a work plane (otherwise Revit puts it on the floor), the counter disappears in the 2d view. If I delete the sinks, the counter is still disappeared. (except for one line, the front edge of the backsplash - but not the side or back)

This must be some kind of bug? because if I copy and paste the counter, the new counter with no sinks is also disappeared. I need to add in the counter again as a new component for it to be visible again...

This problem happens with vessel sinks and drop in sinks from Kohler... 

[marcindd0723]

Hi,
can you share a sample file?

[mbozatl031]

Yes, here is a sample file with the problem.

Make sure to view in 3d and Section

[marcindd0723]

Hi,
thank you for the file.
From my perspective, this is also a bug in Revit. It seems that when a plumbing fixture cuts the casework, it disrupts its representation.

I suspect this may be happening because Plumbing Fixtures are a special, non-cuttable category, but to be honest, it is impossible to be 100% sure.

Regarding the fix, I updated the counter and replaced the two plan-based extrusions with one extrusion drawn in the left elevation.

This kind of silly updates often fix issues like that ;).

If this solved your issue, pls mark this reponse as solution.
Regards,
M