Phase problem

[mairh_tsek]

Hello all,

I have some walls with multiple layers. When I have the phases override I cannot see the layers.

How can I see the layers of the wall with a red colour?

Chech the images.

Thank you in advance! 

[arkitek2ss]

change your Phase Filter in your template to  'Show Complete'.

[barthbradley]

---

@mairh_tsek wrote:

How can I see the layers of the wall with a red colour?

---

Well, there are  two things you need to do: 1) add a solid Red Fill Pattern to "New" Projection/Surface and Cut under Graphic Overrides tab, and 2) change "By Category" to "Overridden" under the "New" Column on the Phase Filters tab

Here's an example of a solid red Graphic Override applied to "Show New" Phase Filter

[s.borello]

Try changing your phase filter to "Show All" or "Show Complete"

[barthbradley]

...or is this what you are after?

[ToanDN · Accepted solution]

Change the overridden materials to By category.

[barthbradley]

,,,or maybe this is what you are looking for?

Pretty much anything is possible through Graphic Overrides and Phase Filters. Just depends on what you want.  

[mairh_tsek]

Hello,

I need the result in the image below.

But what can I do if I want only the new  walls to be in red and not all the new elements?

I need to use filters? 

Thank you in advance! 

[barthbradley]

---

@mairh_tsek wrote:

Hello,

I need the result in the image below.

But what can I do if I want only the new  walls to be in red and not all the new elements?

I need to use filters? 

Thank you in advance! 

---

That's exactly what I showed in Post #5. Yes, you need to assign the Graphic Override to a named Phase Filter - just as I showed in Post #3 and as @ToanDN  showed in Post #6.