PARAMETRIC LEVEL HEIGHT

[dm0144]

Hello everyone

I would like to change the floor height to all the floor that have same floor height (a), for ex. from 3m to 3.2m. Than I would like to change the height on the ground floor (b) and I would like all the levels above the ground floor to follow or to adjust to the ground floor but not to change their floor height (a).

Currently, I had to change all the level separately because the floor height changed. Than I had to do the same because only the ground level height changed.

Any faster way of manipulating the levels?

Regards

[L.Maas]

Not sure, If multi selection does not allow to make the correct changes (because it varies too much between the elements) then there might be some other routes.

Sometimes a schedule can help. Create a schedule with the relevant floors and then enter the values in the schedule, which can be quicker then in the model itself

Further Dynamo could be a solution. Analyze the floors and then use the script to change the parameters based on certain rules 

[RDAOU · Accepted solution]

@dm0144 

Easy and fast way is to use a global parameter ... see the GIF below. I believe it does what you are asking for

[dm0144]

@RDAOU Thanks! Exactly what I was looking for.