Orientation for Symbol of Spot Elevation - Target Filled

[BIMAbhi]

We have found an issue when we change Spot Elevation tag into Revit. We have attached a snap for easy reference.

Please help!

[JacobDSimpson]

Hi there,

Can you not go in to the family and remove the areas? Or edit in the properties area? Is it the angled arrow you are trying to get rid of?

[BIMAbhi]

Thanks for your comments.

Mainly we want to place the tag with same orientation [2 nos of solid hatch in the tag circle] when dragging the tag up/down or left /right condition.

Please let us know if you need nay further clarification regarding the same.

[JacobDSimpson]

Ok, try going in to the family and rotating the 2 black areas 180degrees, then you should be able to get the tags on either end to be in the same corners. Just use two different tags. 

[JacobDSimpson]

You could always change your spot elevations to exterior filled arrows? These display the same whether your arrows are left or right sided.

[BIMAbhi]

Can we change this for i the "circular tag with two hatch" family which have shown in my queries snap?