Modifying the wall profile in plan

[mostafamohamedtaher99]

How can I make this wall in plan? I tried creating an In-Place mass then modeling wall by face but it just kept popping up errors, and I don't want to create it using model in place because I want it to appear in schedule. Any help?

[tmCL9N6 · Accepted solution]

You could make a generic model that only contains a void extrusion.

Make sure its set to "cut with voids when loaded".

Then you can cut the wall with the generic model.

[RDAOU · Accepted solution]

@mostafamohamedtaher99 

Model In-Place with a Void Extrusion (Set Category to wall or generic ... not Mass) ...

Use CUT before you finish the inplace instance

[barthbradley]

Another approach...

[mostafamohamedtaher99]

Does it subtract from the volume of the wall in schedules?

[RDAOU]

@mostafamohamedtaher99 

Yes it does .. the cut portion will be deducted from the volume

[mostafamohamedtaher99]

Thank you so much that helped.