Modifying Curtainwall - Storefront semi circle

[BIM_Dreamer]

Hi, is there any way possible that, can I make semi circle curtain wall/storefront (with mullions) instead of segmented? thanks

[ToanDN]

If you want true curved mullions then one option is using in-place sweeps, another is using adaptive components, or simply a window family.

[BIM_Dreamer]

thank you for your reply. are you kind enough to show me in video on how to do it.your help is much appreciated.

[planner_matlabi · Accepted solution]

Watch Screen Cast

If it solves your problem, feel free to click Accept Solution.

[BIM_Dreamer]

great. thanks

[BIM_Dreamer]

hi, how can delete those extra panel, i tried but i cannot delete. thank you

[planner_matlabi]

Your Welcom

[planner_matlabi]

Must Draw Continues By Main entrance lobby

[BIM_Dreamer]

thnak you, i cannot do that because of the different profile circle line of the lobby, if semicirle can. is there any other way to delete those extra panel?. i attached the profile of the lobby for curtain wall. maybe you could help me to create a curtain wall with that profile. thank you

[BIM_Dreamer]

@planner_matlabiplease ignore the first one i post. i attached the profile with door and the spacing for vertical mullion is 2m c/c. hope you could help me again. thanks

[BIM_Dreamer]

here is the drawings change units to mm. thanks

[planner_matlabi · Accepted solution]

Hi
Excuse me for the delay in answering

I tried on your File

I hope your problem is solved

Attached file

If it solves your problem, feel free to click Accept Solution.