Model In Place Error

[Anonymous]

Hi,

I am getting some strange results when using a model in place. 

I have used the pick 3D lines tool to select the ridge of my roof. I have then modeled ridge tiles using a sketched profile. This all works well until I confirm the in place model and the ridge tiles randomly shrink. Prior to this they would also rotate, unsure why I decided to delete them and do it again but now i'm running into this error.

[barthbradley]

Can you post a screenshot that shows the Profile in sketch mode?  

[Anonymous]

sure thing Brad.

for some reason every image I try to upload to Autodesk forums isn't working so I've had to upload it to a free image host; https://ibb.co/D5DjrTG

[Anonymous]

edit: BB code didn't work

[barthbradley]

That's it? You don't also have a void in the in-place component? That's what it looks like from here.  Look like you are cutting the sweep extrusion at intervals.  

[Anonymous]

I have no idea why but I made some minor adjustments to a dormer opening in the same roof and it made everything fall into place as it should. 

very strange!

https://ibb.co/gjM0QzN

[barthbradley]

So, it was a fluke. It's corrected now? 

[Anonymous]

seems to be yes, thank you anyway Brad