Masonry wall interaction at inserts

[patrickKU32M]

Hi All

I am trying to get Revit to represent brick walls correctly at inserts and junctures when building with brick cavity walls. The incorrect skins end up linking / wrapping.

I have attached an image showing what my model looks like and a sketch indicating what the walls should look like (in red). 

Any help would be greatly appreciated. 

[jay_colcombe]

You will need to create a couple of duplicate Wall types and change the core and numbering priorities to interact accordingly.  This link should help with the process.

Autodesk Revit Tutorial - Continuous Cavity Wall Joins | GRAITEC

[barthbradley · Accepted solution]

Like this?

https://help.autodesk.com/view/RVT/2023/ENU/?guid=GUID-1CCD1005-CBDA-4338-8D60-489095D4BB25

[Simon_Weel]

For the Doors, you have to set a ref plane to act as a 'wall closure'. The location of that ref plane defines how far the wall will wrap. I exaggerated things a bit in this example:

... but it shows what happens when you switch on the wall closure.