Community

Locking Dimensions

Locking Dimensions

anthonywPWC
Contributor Contributor
3,810 Views
9 Replies
Message 1 of 10

Locking Dimensions

anthonywPWC
Contributor
Contributor
‎08-09-2016 09:52 AM

Can anybody tell me what happened to my lock icon?  It is not there and I can not lock the size of my building so I can adjust dimensions on the interior.

0 Likes
Like
Report
3,811 Views
9 Replies
Replies (9)
Message 2 of 10

Alfredo_Medina
Mentor
Mentor
‎08-09-2016 03:58 PM

Welcome to the forum.

 

If you click on a dimension, you don't see the lock icon below the dimension line?

 

2016-08-09_18-56-30.jpg


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
0 Likes
Like
Report
Message 3 of 10

nathan.chapman
Collaborator
Collaborator
‎08-10-2016 11:55 AM

There doesn't happen to be a global parameter assigned.  That will make the dimension not have a lock symbol to click.

 Capture.PNG

Nate

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.
0 Likes
Like
Report
Message 4 of 10

anthonywPWC
Contributor
Contributor
in reply to Alfredo_Medina
‎08-11-2016 02:51 PM

No that locking symbol is not showing up.  It used to appear for me but when I have started this next set of drawings, it is gone.  I did not know if there was a way that it could get turned off and I had accidentally done something.

0 Likes
Like
Report
Message 5 of 10

anthonywPWC
Contributor
Contributor
in reply to nathan.chapman
‎08-11-2016 03:03 PM

Where would a global parameter be located?  I've looked around and I have not really seen anything that has caught my eye.

0 Likes
Like
Report
Message 6 of 10

nathan.chapman
Collaborator
Collaborator
in reply to anthonywPWC
‎08-12-2016 05:56 AM

If you click the dimension you will notice a labels option comes up in the Options bar (version 2016), Revit 2017 it's in the modify dimension panel.  If this is set to "none" then no global parameter is assigned.  My image above shows what it looks like in 2016.

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.
0 Likes
Like
Report
Message 7 of 10

anthonywPWC
Contributor
Contributor
in reply to nathan.chapman
‎08-15-2016 05:33 AM

The label is set to none.  When I click the dimension line to leave the dimension on the screen, that is when the lock symbol is shown, but not when I first place the walls, there is no lock symbol.

 

0 Likes
Like
Report
Message 8 of 10

nathan.chapman
Collaborator
Collaborator
in reply to anthonywPWC
‎08-15-2016 05:47 AM

I think your talking about the listening dimension when placing elements.  They help in the placement but aren't permanent until you make them.  Here is a link https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2015/EN...

 

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.
0 Likes
Like
Report
Message 9 of 10

anthonywPWC
Contributor
Contributor
in reply to nathan.chapman
‎08-15-2016 06:04 AM
Yes and I am supposed to be able to lock those in a constraint so they do not move when trying to change the dimensions of other walls. I have done this before so I know that I can do it, I just need to know why I cannot do it anymore.
0 Likes
Like
Report
Message 10 of 10

nathan.chapman
Collaborator
Collaborator
in reply to anthonywPWC
‎08-15-2016 06:41 AM

Just make the dimension permanent first by clicking the symbol in the screen shot below.  This will give you the ability to add the lock once the dimension is selected.

Capture.PNG

Nathan Chapman
Production Manager at General Heating and Air Conditioning

Revit Architecture Certified Professional
Revit MEP Mechanical Certified Professional
Revit MEP Electrical Certified Professional
DynaFabrication Package Author

Was this answer helpful? If so, please click the ACCEPT AS SOLUTION or the KUDOS button.
0 Likes
Like
Report
Report a website issue