Solved: Level 2 not displaying in the Working Area

jayhar · ‎09-24-2018

Hi,

First time i using Revit Architecture 2018, i am new in this version before i worked in 2009.

i cannot see anything view elevations in working area while open Level 2. to draw a roof open level 2 cannot see below walls. open elevation Building (East,North, South & West) i can see all levels.

Thanks

Jayhar.M.J

Please Subscribe YouTube Channel
https://www.youtube.com/channel/UCclj8v9vHQiFa8_DriuAk3w

Please Mark the Post or Posts as Solution(s) to help others find the answer quickly.

ennujozlagam · ‎09-24-2018

hello, just tried to edit your file, add wall to 2nd level and roof. your file is okay, just use zoom to fit to see overall view. thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

jayhar · ‎09-24-2018

thanks

Please Subscribe YouTube Channel
https://www.youtube.com/channel/UCclj8v9vHQiFa8_DriuAk3w

Please Mark the Post or Posts as Solution(s) to help others find the answer quickly.

ennujozlagam · ‎09-24-2018

hello, check your phasing. please see attached. thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.