Legends. appears diffrently in facade and as a legend

[Anonymous]

Any idea how to remove the "opening lines"

It's a fixed window, as a legend it appear to be a window with hinges

The window appears correctly in section/facade on the sheets (I can change in the settings;  choice of opening function in the sheets but as a legend it only appears as a window with hinges)

Any idea how  can control "choice of opening function" in legends or remove the lines like in the image below 

Thank you

[ToanDN · Accepted solution]

Are the swing lines controlled by type or by instance?  Set it to a type parameter and turn off for the fixed window type.  Then use that type for legend.

[Anonymous]

Thank you for your reply

Can you please guide me how I do this -->"Set it to a type parameter and turn off for the fixed window type"

Thank you

[barthbradley]

Does the window have a Visibility Parameter for Elevation Swings Lines or are they not Visible in certain Detail Levels? 

[Anonymous]

Thank you for your reply 

In elevation I can change add and remove the swing lines by changing the number (see red mark) that works perfectly on elevation but the problem I have is that in Legends I cant find that option (to add or remove the swing lines)

[barthbradley]

Try setting the default Visibility condition to invisible and reload the Window into the Project.  That should remove them in Legend View. 

...BTW, you want to check override existing version/parameters upon reloading. Might not be ideal.  

[barthbradley · Accepted solution]

Ah, I get what you want to do. Go with @ToanDN 's suggestion. Create Family Types for each operation (e.g. fixed Type with no Swing Lines and hinge Type with Swing Lines). 

[Anonymous]

Thank you very much