Joining Curtain Panels on Obtuse Angle

[Kev_D]

As the title suggests, can we join the Curtain Panels on a weird angle. and have a line showing the Mullions joined.

Plan Views of the CW

Original.

Proposed.

Red lines showing Panels joined (cleaned up) and the line in the Mullions. I am thinking it would just have to be Detail Lines and Filled Regions, but I try to avoid them at all costs.

[ToanDN · Accepted solution]

Change the panels to a basic wall type of the same thickness and material.

[barthbradley]

I don't understand what I'm looking at in your screenshots.  

I am familiar with "obtuse" though.  Shawshank Redemption.  

[Kev_D]

That could be a result. Will have to wait till tomorrow to try. I'm sure it will still tag as a panel. Yes/no?

Cheers

[Kev_D]

One of my favourite films. Maybe cause I am Irish. 

Anyway the screenshots are from a plan. Showing a CW without a Million at the intersection. I want the glass to be frameless. 

[barthbradley]

Ah! Plan View! You even said "Plan View" in your post. Guess I need to read gooder.  😉

Irish! I get it, Red. Good one.  

[barthbradley]

So I'm envisioning a condition like this, where the mullions are omitted at the corners.  So, if you don't want to replace the panels with basic walls, how about a "bead" mullion. That is, a small L corner mullion the same thickness and material as the glazing.  Cleanup in Plan View could be done using the Linework tool with Invisible Lines -- if it matters.   

...or, model a custom-shaped Panel for those conditions. 

[Kev_D]

Worked a charm. Thank you

[Kev_D]

Thanks @barthbradley  but the Wall suggestion worked.