Is there a way to place dimensions a set distance from your building or drawing?

[joe-2020]

I could have used a quarter inch equals a foot on a c size sheet of paper but due to my dimensions, there is not a uniform distance from my building I had to rework it so it they would all fit.

Is there a way to set all the dimensions at a set distance?

[ToanDN]

Do you mean a Distance to a corner of the sheet?

[joe-2020]

Well lest say I want to take the dimension from all exterior walls of the building, but I want them all to be shown 2 feet from the building so they all look nice and equal distance from the building.

[ennujozlagam]

are you talking about equal distance? show some screenshot. thanks

[joe-2020]

yes, is possible to display all dimensions 2 feet from the building? thank you.

[ennujozlagam]

are talking something like this? thanks

[constantin.stroescu]

there is a way to place the Dimension Lines at a certain distance between them..Anyway, the first dimension line.. you'll have to place it by using a frame of Reference Planes. 

After placing the first Row of Dimensions, the following will follow the snap rule...

https://knowledge.autodesk.com/community/screencast/19f86aa6-c5e7-4cba-85a0-365d93023519