Intersecction T-shape

[Marielen_]

I need to draw this intersection without the circled part in blue, that is, a T-shaped intersection. Until then it was designed with a metric profile family, when together the points form a unilateral corner.

[barthbradley]

Looks like you are trying to "blend" two concave shapes together.  Cut away the "excess" with a Void or two.   Post the file. Lets take a look at it. 

[Marielen_]

I cannot post the project file, but I send the file with the specific part.
I didn't understand what VOID would be. Was it the molding of a void on the spot?

[barthbradley · Accepted solution]

Create In-Place Component Voids to cut away the overlapping geometry.  Are you familiar with how to do that?  

BTW, are these Slab Edges suppose to be Cable Trays?  Just curious.  

[Marielen_]

if that's what I'm thinking, I modeled it on the spot as a vacuum extrusion and it didn't work. As you did? could you send me the file please? This structure is for rainwater drainage, but the concept you mentioned is similar.

[barthbradley]

The two In-Place Component Voids are named "Generic Models bb1" and "Generic Models bb2". They are under the Generic Model Category in the Project Browser.  

Good luck.  

[barthbradley]

2019 attached.

BTW: Void Sweeps were created using "Canaleta(bb)" Profile Family.   

[Marielen_]

I got it because of your help. Thank you!