Interior Window Trim

[carol.bandy]

Greetings,

I am trying to incorporate a manufacturer-provided interior trim file (Classic Craftsman) into my Revit model. I am able to get the crown molding sweep into the model just fine. I can not figure out how to adjust the other molding profiles - i.e. the head trim,etc. to fit various windows and doors. Here is a link to the Revit files on the website. Thank you, in advance for your assistance.

https://windsorone.com/resources/cad-files/revit-files/

CB 

[mphungDCHNW]

Hi,

Have you tried void extrusions yet?

[carol.bandy]

No I have not. I was trying to use the trim - revit files - provided on the link above - just adjust them. Thanks!

[MichaelWarwick7522]

Edit the family and add a length parameter.

The sweep has a tiny return to make the end mitre, so add another pair of reference planes offset by 3/4, dimension and lock the dimension, then edit the sweep, edit the path, align and lock the return to those new reference planes.

Hope this helps.

[carol.bandy]

Awesome, thank you.  I will give it a try in the am and let you know how it goes. 

[barthbradley]

---

@carol.bandy wrote:

Greetings,

I can not figure out how to adjust the other molding profiles

---

Sweeps are made with 2D Profiles.  Edit the existing Sweep and change the Profile it uses to the Profile you want to use. 

...here's a parametric trim in a door family:  

https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/Revit-M...

[carol.bandy]

Thank you for your input. I will give it a try.