Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
You can try this create a View Template and go to view visibility, uncheck from model categories and apply to views you don't want to see your topography. Thanks
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Several ways: - put it in a workset default to not visible and turn it on where you need it - put it in a secondary design option - put it in a future phase and set only the 3d view to capture that phase - use view templates
hmm...that's a tough one. I wonder if V/G overrides for imported geometry might be under "V/G Overrides Import". Yeah; that might be a bit of a stretch. Never mind.
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
