I want to cut two holes in my revit kitchen countertop

[AidanHawkins]

I want to cut two holes in my revit kitchen countertop

Like so > 

How can I do it? Should I do it in the model..

[AidanHawkins]

I want to cut two holes in my revit kitchen countertop

Like so > 

How can I do it? Should I do it in the model..

[Revit_Whisperer · Accepted solution]

I wouldn't really recommend modeling that, instead just document it with detail lines, but if you do want to model it you will need to edit the countertop family 

[Revit_Whisperer · Accepted solution]

I wouldn't really recommend modeling that, instead just document it with detail lines, but if you do want to model it you will need to edit the countertop family 

[Revit_Whisperer]

If you do choose to model it, it is also possible to create a face based void to cut the hole.

[Revit_Whisperer]

If you do choose to model it, it is also possible to create a face based void to cut the hole.

[ToanDN · Accepted solution]

Host a face based void family on the countertop and copy it. In the project.

[ToanDN · Accepted solution]

Host a face based void family on the countertop and copy it. In the project.