How to set view option so that the reinforcing bars are not visible inside con'c

[kcmc_bim]

I'm currently doing reinforcement on a concrete object. However, there is some inconvenience in doing this, so I ask about this.

When I reinforce the concrete object, I see both the reinforcing bars inside the concrete and the reinforcing bars that protrude out of the concrete. (As in Figure 1)

pircture 1 (fuxk)

Because the concrete object I'm dealing with is an unstructured object, there are many tasks that require further modification after reinforcement.

However, it is difficult to discern the rebar because it looks like Figure 1 on the Levit screen.

So I want to set the view options to show only the reinforcing bars that are protruding outside, not the reinforcing bars inside (see Figure 2).

picture 2 (I want)

What should I do?

[bin]

Select the Rebar, Edit the View Visibility States.

[kcmc_bim]

I tried applying the view options you told me but it doesn't solve the problem. (As shown in figure r1)

I want a view option that doesn't show the bars inside the concrete. (As shown in figure a1)

[bin]

Can you share your Revit file please?

[barthbradley]

Turn off the Category then.  If you are uncertain of the Category, then select one, right-click mouse, select Override Graphics in View=>By Category from drop-down.  

[bin · Accepted solution]

Unticking this will hide the part in concrete.

[kcmc_bim]

Changing the view option to the method you said 'Unticking this will hide the part in concrete' solved the problem.
Thank you so much.