how to make stair middle suport

[BIM_Dreamer]

how to make stair middle support under the thread/step. thank you.

[Anonymous]

Switch on the middle support.

[BIM_Dreamer]

That is already a middle support. My question is how to make the middle support to be underside of the steps. Thanks 

[ToanDN]

Use a carriage type for the mid suppport.

[barthbradley · Accepted solution]

Look to me like the Tread Profile is the problem (e.g. drawn incorrectly in relationship the Origin Ref. Plane).  Does it happen like this when you use the Default Profile?  

[ToanDN · Accepted solution]

Like this?

Annotation 2019-09-27 162437.png

[barthbradley]

Does your screenshot depict what you are trying to achieve? Looks like you want the top of stringer on the same plane as the top of the treads.  In other words, the treads would be fastened to the side of the stringer as shown. 

Stair Mid.png

[BIM_Dreamer]

it's already used carriage. thank you

SSTTR.JPG

[BIM_Dreamer]

managed to get the stringer to underside of steps by editing the tread profile moving above the reference line. thank you

sttr.JPG

[BIM_Dreamer]

don't mind to share with this configuration. thank you

str2.JPG

[ToanDN]

The top of tread profile is on the reference line. The tread thickness under the stair run configuration is set to equal to the height of the tread profile. The carriage will match to the bottom the treads automatically.

[BIM_Dreamer]

don't mind to show me where is it, because right not now the stringer and steps don't align each other i have still 1mm gap. thanks

str2a.JPG

[zeynep3KLJ6]

This is great! How about the stair landing support? 

Stair landing support.PNG

[ToanDN]

---

@zeynep3KLJ6 wrote:

This is great! How about the stair landing support? 

---

Model in place or beams.