Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to combine different parameters from different schedules

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
mshabanaVFZ8X
361 Views, 2 Replies

How to combine different parameters from different schedules

mshabanaVFZ8X
Explorer
Explorer

Hi all,

I had searched a lot to find a solution before writing this post but I didn't and I hope to find a solution here. As shown in the attachment, there are 2 houses in the project. I got the grand total of FSR, windows, doors, curtains walls separately. All I need to do is to get the opening calculation for each house separately based on the total window area divided by FSR. So, my question is: Is it possible to do that calculation by combining the grand total of these different parameters of different schedules?

Sorry if it's a little bit confusing.

0 Likes

How to combine different parameters from different schedules

Hi all,

I had searched a lot to find a solution before writing this post but I didn't and I hope to find a solution here. As shown in the attachment, there are 2 houses in the project. I got the grand total of FSR, windows, doors, curtains walls separately. All I need to do is to get the opening calculation for each house separately based on the total window area divided by FSR. So, my question is: Is it possible to do that calculation by combining the grand total of these different parameters of different schedules?

Sorry if it's a little bit confusing.

Labels (2)
2 REPLIES 2
Message 2 of 3
ToanDN
in reply to: mshabanaVFZ8X

ToanDN
Consultant
Consultant
Accepted solution

You will need some add-in or Dynamo.  Try this guy.

 

https://ideatesoftware.com/ideatesticky

0 Likes

You will need some add-in or Dynamo.  Try this guy.

 

https://ideatesoftware.com/ideatesticky

Message 3 of 3

mshabanaVFZ8X
Explorer
Explorer

That will help. Thanks.

0 Likes

That will help. Thanks.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report