Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

How to change topography contour line intervals after topo has been created?

7 ANTWORTEN 7
GELÖST
Antworten
Nachricht 1 von 8
james
19888 Aufrufe, 7 Antworten

How to change topography contour line intervals after topo has been created?

I understand how to use the Site Settings tool box to set the contour line interval when creating a new toposurface, but how to I change the interval once the surface has already been created?

7 ANTWORTEN 7
Nachricht 2 von 8
barthbradley
als Antwort auf: james

Site Settings.png

Nachricht 3 von 8
constantin.stroescu
als Antwort auf: james

click on the small arrow from Model Site and change Increment Value of Secundary Contours (2)

  • you can also  change the height interval between primary contours (1)

Image 1.png

Constantin Stroescu

EESignature

Nachricht 4 von 8
james
als Antwort auf: barthbradley

Yes, the Site Settings tool box gives lots of freedom when creating a toposurface, but changing the contour interval value doesn't change the contours on my toposurface.

 

Whoops, my mistake.  This worked just fine.  Thanks!

Nachricht 5 von 8
barthbradley
als Antwort auf: james

You can use Site Settings after you create the Toposurface to change intervals. 

Nachricht 6 von 8
barthbradley
als Antwort auf: james


@james wrote:

Yes, the Site Settings tool box gives lots of freedom when creating a toposurface, but changing the contour interval value doesn't change the contours on my toposurface.

 

Whoops, my mistake.  This worked just fine.  Thanks!


 

ARRGH! Missed it by a hair.  I guess I should have included a Toposurface in the background of my Site Settings Screenshot. 

Nachricht 7 von 8
constantin.stroescu
als Antwort auf: james

Nachricht 8 von 8
jenniferJ7YHR
als Antwort auf: james

This has been changed now and the selections under Model Site don't appear to be the same.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report