Help With Complex Mass Shape

Anonymous · ‎09-04-2019

Hello!

I am having quite the struggle in terms of making a very complex mass shape.

I am trying to design this:

It's a very unusual shape, however I can't seem to figure out a way to make this! If anyone could help me out with this that would be amazing!

barthbradley · ‎09-04-2019

This is the closest I could get...

constantin.stroescu · ‎09-04-2019

is it something like this?

if it is , have a look at this screencast (a void form needs to be added):

Constantin Stroescu

Anonymous · ‎09-04-2019

Wow!

This is perfect! Thank you so much!

Anonymous · ‎09-05-2019

I have followed your screen cast and it worked perfectly!

However, o you know of any way to lower the top tip to spiral down into itself?

Thanks!

constantin.stroescu · ‎09-05-2019

if you mean the void that penetrates from above , some thing like this:

then have a look at the following screencast:

Constantin Stroescu

constantin.stroescu · ‎09-06-2019

Of course that you can use Wall by Face but the shell will be even and too rigid. So I'll propose to make a hole by using Void as follows:

when you appreciate the exterior Form fits your purpose, select the Element and Copy it to clipboard.
then Paste it into the Same Place , creating so an other instance of the Form Element .
select the new created instance an scale the Profiles as you need to
turn the second Form into a Void to cut the first Form

Constantin Stroescu

Community