Fail to generate automatic landing layout

[Anonymous]

Good afternoon

I am trying to create a straight stair with 12 risers + landing + 14 risers + landing + 12 risers, total 43 risers and I get this message: "Fail to generate automatic landing layout".

I was following this solution https://forums.autodesk.com/t5/revit-architecture-forum/stair-landing-problem-problem-and-workaround...

but it's no working.

any suggestions please? 🙂

Thank you

Pedro Ospina

Bachelor in Architecture - Naval Architecture Student

Golden Gate Network 

[barthbradley]

I'm trying to figure out your math. 12+14+12=38. No? 

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2016/EN...

[ToanDN]

12+14+12+5=43

[barthbradley]

What??? 

...yep. My Texas Instruments Calculator confirms it.  12+14+12=38.  

[Anonymous]

I am counting the 2 risers generated by the 2 landings=4 + the final landing at the end =1: 

38+4+1=43

[ToanDN]

See below:

[barthbradley]

That's 12+14+12 plus another 5.  Where does the 5 risers come from?  

[barthbradley]

You don't count landings. 

[ToanDN]

---

@barthbradley wrote:

That's 12+14+12 plus another 5.  Where does the 5 risers come from?  

---

5 = 43-12-14-12

[Anonymous]

Rebar cover is not activated 😞 I went into the family editor to find it but nowhere...

I did not work.

thank you

[Anonymous]

miscalculation. I thought that landings generated 2 more

thx

[Anonymous]

Default stairs ends a run with a riser...so you don't have a riser for your landing, it is at the end of the run. 

@barthbradley's riser count is correct... See pic...ignore riser height...

[barthbradley]

Alright then. 5 risers could be another 2 1/2 feet of rise (figuring a 6 inch riser height). Maybe we should ask what the total rise is supposed to be -- instead of guessing. 

[Anonymous]

Oh...straight stairs...Still 38 Risers  12 + 14 + 12 = 38

[barthbradley]

Screw it, @Anonymous. Like I said on your duplicate thread: Use a Ramp.  

he, he. 

[ToanDN]

---

@Anonymous wrote:

Rebar cover is not activated 😞 I went into the family editor to find it but nowhere...

I did not work.

thank you

---

Rebar cover is a serious bizness

[Anonymous]

are you making funny of me?.

it's not cool

thanks.

[barthbradley]

Not at all, @Anonymous! I like you. Promise.  

I'm just feeling a little giddy. Sorry.