Export - column grid lines
check export options. Make sure that center is exported automatically or as center.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Check your LTSCALE in Model tab in AutoCAD. try a couple different numbers, depending on the line style you may net see results at lower scales. i usually start with 12, 48 & 96 etc....
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Grid lines are export to linetype NOT by layer, but by object.
Are you exporting Sheets or Views?
Also...Grids are a compound element; a circle, text and a grid line. When you export there are three choices for how to create layers. You need to either use the second or third option. One exports the conflict element with element overrides (grid line patter) and the last one creates a new layer for each condition so everything is exported ByLayer. I nearly always use the last (Layers tab of export setup) Export Layer Option: Export all properties BYLAYER, and create new layers for overrides.
Steve Stafford
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
