DIMENSION CENTER EQUAL

[Anonymous]

Hi.

i'm trying to center 2 lines with a desired dimension between walls and accidentally i achieved through dimension parameters. I put a desired dimension between equals (see attached image). But i can´t do it again.

I find this really helpfull to center objects, families, lines between objects without modifiying the objects lenght.

Thanks for your help and sorry for my english.

[arunag]

[Anonymous]

THanks for your answer but what i want is center the objects at equal distance but the center dimension remains with the value that i put in it. for example y have 2 walls but between them i need to put two lines separated 2" from each other. what i do is draw lines and use the align command but it takes a long time and effort and sometimes i forget to delete the lines.

[arunag]

Just select the continuous dimension , you will see a not EQ sign, click on it , it will equalize . 

[constantin.stroescu · Accepted solution]

If I understand you well , you want to have a midle fix dimension placed at equal distance from both sides..

In this case I sugest:

• draw a dimension chane of 3
• then select  the midlle dimension and lock it
• select the one of the mid element border ( Reference Plane) and then change the side dimension using a formula :  = (D (overall distance) - M (mid segment))/2

Better , have a look at my screencast:

https://screencast.autodesk.com/main/details/4b1cbda8-4679-4e5b-a703-bed7b566157a

[Anonymous]

Thanks a lot. That was exactly what i meant.

Greetings.

[Anonymous]

Hello

How can i center a decal on a wall?

thanks

[ToanDN]

Same way you center a painting on a wall in reality. Create a reference center to the wall and move the decal so that its center point snap to that reference.