Creating stairs with ramp included

Creating stairs with ramp included

Anonymous
Not applicable
10,300 Views
9 Replies
Message 1 of 10

Creating stairs with ramp included

Anonymous
Not applicable

Yesterday I saw a nice example of combining stairs with a ramp that crosses the stairs, as you can see in the picture and I wondered how I could draw it in revit. Any ideas? 

 

ramp and stairs.jpg

 

Any help would be appreciated.

0 Likes
Accepted solutions (1)
10,301 Views
9 Replies
Replies (9)
Message 2 of 10

ToanDN
Consultant
Consultant

In place model.  As with most other custom things.

0 Likes
Message 3 of 10

barthbradley
Consultant
Consultant

I see it a little differently. Looks like a stairs and ramps abutting each other. I'd try modeling it that way using with stairs and ramps. 

0 Likes
Message 4 of 10

ToanDN
Consultant
Consultant

@barthbradley

 

I think you are right.  Perhaps build the ramp first then fit the stairs in between runs with sketched boundaries. 

0 Likes
Message 5 of 10

PijPiwo
Collaborator
Collaborator
Accepted solution

I don’t think it’s possible to do with the stair and ramp tools. How can you make the stair to follow the ramp’s slope (at the top of the run) - pic1? Am I missing something here?

With the in-place solid and void extrusions, on the other hand, it’s fairly easy to do -pic2.

Message 6 of 10

Anonymous
Not applicable

Many thanks to all of you for your excellent suggestions and for taking the time to reply. I agree that making an in-place solid is the easiest and fastest solution. Although it would be interesting to have parametric stairs of this type in the families collection.

 

Best regards

0 Likes
Message 7 of 10

barthbradley
Consultant
Consultant

Wow! Nice job, @PijPiwo

0 Likes
Message 8 of 10

Anonymous
Not applicable

I think this tutorial


@Anonymouswrote:

Yesterday I saw a nice example of combining stairs with a ramp that crosses the stairs, as you can see in the picture and I wondered how I could draw it in revit. Any ideas? 

 

ramp and stairs.jpg

 

Any help would be appreciated.



 will  help you:

https://www.youtube.com/watch?v=uEcvoQzewBQ

Message 9 of 10

Anonymous
Not applicable

Hi, I'm working on a project for my class and was wondering if you had a rvt. file of this on revitcity? It would go perfect with my design, and sadly I haven't learned how to do the void extrusion stuff yet.

Thanks,

Teddy

0 Likes
Message 10 of 10

Anonymous
Not applicable
I need that file (stair_ramp2.JPG) in 3D model, please.
0 Likes