Create Custom Chevron Brick Pattern

[Anonymous]

please kindly provide a chevron brick pattern as a size of ( 200x 1200x2mm) in a format of *.pat file.

its really helpful for me ongoing live project.....

[aRcHiTeCt.JM]

... hi @Anonymous 

... go here https://pattycake.io/pat

@Pattycake_Kyle 

... you can draw any .pat that you need

... try that pattern as a size of ( 200x 1200x2mm) 

... it is pretty easy

[Anonymous · Accepted solution]

Registration code required please kindly provide detail how to signup and getting registration code.

[aRcHiTeCt.JM · Accepted solution]

... hi @Anonymous 

.... just follow instructions

.... they will be happy to assist you

... here are some other treads about .pat files from this pattycake

https://forums.autodesk.com/t5/revit-architecture-forum/tile-pattern-chevron-2-quot-x-9-quot/m-p/8817278

https://forums.autodesk.com/t5/revit-architecture-forum/bespoke-brick-pattern/m-p/8868153

... or you can try this other one: https://www.hatchkit.com.au/

[hugha · Accepted solution]

Try this:

;-------------------------------------------------------------------------------
; Written by HatchKit Professional
; HatchKit (c)1990-2019 Cadro Pty Ltd
; www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date : 2019/09/27
;-Time : 21:37:40
;-HatchKit Output Filetype : Revit with HatchKit Add-In
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=MM
*Chevron1200x200+2
;%TYPE=MODEL
44.977879,0,0,2414.82470,10.103899,1200,-46894.572127
135.02212,-2,0,2414.82470,-10.103899,1200,-46894.572127
44.977879,0,282.84,2414.82470,10.103899,1200,-46894.572127
135.02212,-2,282.84,2414.82470,-10.103899,1200,-46894.572127
90,0,0,0,-1701.05627,282.84,-2.8311396
90,848.53,848.53,0,-1701.05627,282.84,-2.8311396
90,-2,0,0,-1701.05627,282.84,-2.8311396
90,850.53,848.53,0,-1701.05627,282.84,-2.8311396

as discussed elsewhere, representing 2mm mortar may be overfine modelling and this could be sufficient:

;-------------------------------------------------------------------------------
; Written by HatchKit Professional
; HatchKit (c)1990-2019 Cadro Pty Ltd
; www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date : 2019/09/27
;-Time : 21:48:42
;-HatchKit Output Filetype : Revit with HatchKit Add-In
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=MM
*Chevron1200x200+0
;%TYPE=MODEL
45,0,0,200,200,1200,-1200
135,0,0,200,-200,1200,-1200
90,0,0,0,848.5281

hth,

Hugh Adamson

[Pattycake_Kyle · Accepted solution]

Thanks @aRcHiTeCt.JM for helping out! 

@Anonymous, they pretty much covered it. We are opening up our beta to everyone now, so please use code: sprinkles19 to sign up.

For the chevron you requested, I believe this is what you need: https://pattycake.io/pat/6G296A718mB

With the calculator templates, you can easily change sizes from here as you reiterate designs and there are also options for herringbone and other standard patterns. Just make sure you select MM for your units on the left when using Revit Model Patterns.

Note that our current beta has not yet been updated with a herringbone that can do variable widths. We will release that in our next big Version 01 update. If this is something you need, feel free to reach us in any of the ways above and I can help directly 🙂 Happy pattycaking!

This is the process to make the above pattern:

[Anonymous]

really its very helpful for me without spacing but i want with spacing of 2mm