Copy views from sheet to sheet. I understand duplicates not allowed....
You could create a parameter named "Test" (or something similar) and associate it with views category to help organize your Project Browser. Duplicate the views and categorize them using this parameter, allowing you to place similar views on different sheets. Although these views are not identical, this approach should help you manage them effectively.
A resposta te ajudou? Não esqueça de curtir e aceitar como solução!
Vitor Bortoncello | Arquiteto | BIM Manager
Autodesk Certified Professional
You can mock up sheets with "placeholder" building sections/elevations. For example, in your template you can create any number of section views that are likely to get used; building sections, wall sections etc. Put these on sheets so as you start to build the model the sections start showing the model. Move them to locations more appropriate to what you are building and the sheets will update as well.
You ought to look into the long standing practice of creating a "cartoon set" (movie productions create a story board) early on to predict what views will be required. As it happens your template ought to be able to produce a rough cartoon set for you...just print all the sheets at the beginning of a project (blank views) and sketch what you expect to need on them. The more of these typical views you have in your sheet set the closer your cartoon set will be to what you require in the end. The number of special details you need is one variable that will be hard to pin down ahead of time. The standard ones you use all the time should already be on sheets ready for printing and/or editing for the specific building conditions.
Steve Stafford
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
