Community

Continous dimension around corner

Continous dimension around corner

Anonymous
Not applicable
835 Views
2 Replies
Message 1 of 3

Continous dimension around corner

Anonymous
Not applicable
‎08-15-2018 12:53 AM

 Is it possible to create dimensions like in the image? 

Could use detail lines, but would rather not.

 

Thanks in advance!

Preview file
118 KB
0 Likes
Like
Report
Accepted solutions (1)
Solution 1
836 Views
2 Replies
Replies (2)
Message 2 of 3

ennujozlagam
Mentor
Mentor
‎08-15-2018 01:21 AM
Accepted solution

hello, not possible at the moment in Revit. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Likes
Like
Report
Message 3 of 3

barthbradley
Consultant
Consultant
‎08-15-2018 07:53 AM
@Anonymous wrote:

 Is it possible to create dimensions like in the image? 

Could use detail lines, but would rather not.

 

Thanks in advance!

Revit doesn't have it because there is no such ANSI Y14 Dimensioning Standard.  I think what you are looking at in your picture is temporary guide linework, placed so that the drafter could place all  dimensions strings at a consistent and uniform offset and spacing on all sides.   Use Ref. Planes not Detail Lines.  You don't want to print these lines on your plans.  They would just be confusing clutter. 

0 Likes
Like
Report
Report a website issue