Connecting Elevation to Sheet Advanced

[Anonymous]

I have 2 separate Curtain walls and would like to have them connected to the same reference sheet. current photo shows CW12 as a reference to sheet 5.206 and CW 13 with no reference. he is what I would like CW12/5.206 and CW13/5.206

[barthbradley]

Duplicate the View and place that duplicate View on the same Sheet as the other one.   

[Anonymous]

This is what i did to interpret the views with the sheet but I am checking if it's possible to do it any other way 

[barthbradley]

The way you did it looks fine to me.  Legible and neat.  What would you like different?  Maybe I'm not understanding the full question.   

[ToanDN]

Drop another elevation mark and choose reference other view, then choose the CW12/5.206 elevation view.

[Anonymous]

what I am asking is probably impossible without coding. I want to see if I can link the elevations to the sheet without having them on there.

[Anonymous]

that will just add another elevation for CW12/5.006. i want a different CW number on it 

[barthbradley]

---

@Anonymous wrote:

that will just add another elevation for CW12/5.006. i want a different CW number on it 

---

Reference Other View wont make another elevation.  

[ToanDN]

You can place CW13 view on 5.006 sheet but keep it outside, upper left of the border.

When you print, choose Zoom = 100%, Offset from corner = No Margin, then anything outside, upper left to the border won't print. 

[Anonymous]

sorry for miss speaking but using a reference won't help because it will have the same CW label