Collsionscheck with Site Objects

nathan_torggler · ‎09-20-2023

Hi,
I placed some points as symbol "Site" in my model. I would like to do a collisioncheck. Unfortunately site is now chooseable in the collision check.

jay_colc · ‎09-20-2023

Unfortunately the Interference Check is limited in its Category Selection, outside using Navisworks you are stuck with the selection available.

I would suggest adding this to the Ideas Community Forum

Jay Colcombe

Autodesk Certified Instructor
Revit Architecture & Structure Certified Professional
AutoCAD Certified Professional
B.Sc. Hons Civil & Structural Engineering

If you find my post interesting, feel free to give a Kudo.
If it solves your problem, please click Accept to enhance the Forum.

BDMackey · ‎09-20-2023

Possibly change the Revit Category to one that is available with the Interference Check. I have done this for clients who don't want to dive into the Navisworks realm. The other thought is if this project is on ACC/BIM360 then you could enable the Model Coordination and check for clashes there